| MAIN FEATURE | |
|---|---|
| Capacity | 600VA |
| Load Capacity | 360W |
| Input Voltage | 160V-270V |
| Output Voltage | 230V ± 10% |
| Frequency | 50Hz ± 5% (Battery Mode) |
| Noise Level | Audible Noise: < 40dBA (1 meter from surface) |
| Battery | 01×12V7.5Ah |
| INPUT | |
| Frequency | 50Hz ± 5% |
| Voltage Range | 220V/230V, 160V~270V at line input |
| OUTPUT | |
| Backup Time | PC with LCD 17’’ monitor 10-15 minutes |
| Voltage Range | 230V ± 10% |
| Type of Wave | Mains mode: pure sine wave; Battery mode: the simulated sine wave. |
| Transfer Time | Typical 8ms, 10ms max. |
● LED display or LCD display
● Microprocessor-based digital control
● Boost and buck AVR for voltage stabilization
● Auto-sensing frequency
● Wide input voltage range
● Power-on self-test
● Cold start
● Auto-restart when mains power is restored
● Auto track mains phase to ensure that inverter output voltage has the same phase with utility voltage, reducing transfer time and peak surge
● Intelligent battery management: battery temperature compensation to extend the battery life; three-stage charging to shorten the recharge time
● Short circuit, battery overcharge / over-discharge, overload, surge protections
● Automatic charging in OFF mode
● Optional no-load shutdown
● Optional RS232 / USB communication port and RJ11 / RJ45 protection
● Unattended safety shutdown: system alarm and auto Power-On / Off by RS232 or USB interface communicating with PC
