| MAIN FEATURES | |
|---|---|
| Capacity | 6000VA/4800W |
| Model | HAMBURG-HT1106KS |
| Brand | G-Mac |
| Brand Origin | Germany |
| Technology | Online Transformer Based Industrial UPS |
| INPUT | |
| Phase | Single Phase to ground (P+N+E) |
| Voltage Range |
110-300VAC±60%(Load) 160-300VAC±100% (Load) |
| Frequency Range | 40Hz-70Hz |
| Power Factor | 100%(Load)≥0.95 |
| OUTPUT | |
| Output Voltage | 220VAC+1%(208,210,230,240 Adjustable) |
| Voltage Ragulation | ±1% |
| Frequency Range |
Synchronize Correction Range-47-53Hz or 57-63Hz Battery mode-50Hz/60Hz(Adjustable)+0.25Hz |
| Surge Ratio | 3:1 |
| Todal Hammonic distortion | ≤3%THD(Linear load) ≤6%THD(Non-linear load) |
| Transfer time |
ACto DC-0ms Invertion to bypass-4ms(Standard) |
| Wavwform | pure ssine wave |
| BATTERY | |
| Battery model | Depends on customer requirments |
| Quantity | 3 PCS |
| Maximun Charging | (1-12)AMP- adjustable |
| Charging Voltage | 41.0VDC±1% |
| WARNING | |
| Battery Model | Alarms beeps every 4 seconds |
| Low Battery | Alarms beeps every seconds |
| Overload | Alarms beeps every seconds |
| Fault | Alarms beeps every seconds |
| SYSTEM FEATURES | |
| Temperature & Humidity |
Relative humidity-20-90% temperature- 0-40°C |
| Noise | <50dBA@ 1 meter |
| LED/LCD display | System state, Load power, battery capacity, utility power mode, battery mode, bypass mode, fault indicator |
| Communication interface | Support windows@2000/2003/XP/Vista/2008, windows 7-8, Linus, Unix |
| Dimension | 384mm×192mm×730mm |
| Weight (Kg) | 40.7(Approx) |
Key Features
Applications
1. What is the HAMBURG-HT110KS?
The HAMBURG-HT110KS is a True Online Double-Conversion UPS, designed to provide continuous, clean, and reliable power to sensitive electronic equipment.
2. What is the input voltage range?
It typically accepts a wide input voltage range of 110–288 V AC, ensuring stable operation during voltage fluctuations.
3. What is the output voltage?
The output voltage is 220 V AC ±1%, suitable for computers, servers, and other precision devices.
4. Does it provide pure sine-wave output?
Yes — it delivers a pure sine-wave output, protecting sensitive equipment.
5. What is the battery configuration?
Depending on the model variant, it uses a sealed lead-acid battery system (e.g., 36 V DC or 72 V DC), with batteries connected in series.
6. How long is the battery backup time?
Typical backup ranges from 5–15 minutes at 80% load, depending on battery capacity.
7. How long does it take to recharge the battery?
Full recharge usually requires 6–8 hours after the mains power is restored.
8. Does it have an LCD or LED display?
Yes — it includes an LCD/LED display showing input/output voltage, frequency, load percentage, battery level, and fault indicators.
9. What are the audible alarm conditions?
On battery – beep every 2 minutes
Low battery – beep every 6 seconds
Overload – continuous beeping
Abnormal input voltage – beep every 2 minutes
10. What is the operating temperature range?
It operates efficiently between 0°C–40°C.
11. Can it be used with generators?
Yes — the UPS is compatible with generator power for uninterrupted operation.
12. Is it suitable for home or office use?
Yes — ideal for home offices, computer labs, networking devices, routers, servers, and small medical devices.
13. What is its efficiency?
The UPS operates with an efficiency of approximately 87–90% in online mode.
14. Does it have surge and spike protection?
Yes — it provides full-time lightning, surge, and noise protection.
15. How do you replace the battery?
Turn off and unplug the UPS, open the battery compartment, remove and replace the batteries (check polarity), then charge for 6–8 hours before use.
16. Can it be installed in a rack?
This model is primarily tower type, but optional rack-mount kits may be available.
17. What is the warranty period?
Standard warranty is 1 year, covering the UPS and internal batteries.
18. How to perform firmware updates?
Firmware can be updated through the RS232 or optional USB/SNMP port using the manufacturer’s software tools.
19. Does it support remote monitoring?
Yes — with an optional SNMP card, remote monitoring and control are possible.
20. What is the weight of the UPS?
Weight varies by configuration, typically 10–12 kg.
21. What type of devices can it support?
Supports computers, servers, routers, modems, CCTV systems, small medical and lab instruments, and other sensitive electronics.
22. How to reset the UPS after an overload?
Turn off the UPS, unplug all devices, wait 5–10 minutes, reconnect within rated load, and turn the UPS back on.
23. Can it operate in humid environments?
Yes — recommended relative humidity below 90% (non-condensing).
24. What should I check if the UPS won’t turn on?
Ensure the power cord is connected, the battery is charged, and no fault codes appear on the display.
25. Can it be used outdoors?
No — designed for indoor use only in clean and ventilated areas.
26. What is the input frequency range?
Supports 40–70 Hz, compatible with unstable grids.
27. Does it include an Emergency Power-Off (EPO) feature?
Yes — includes an EPO terminal for immediate shutdown during emergencies.
28. How should the UPS be cleaned?
Turn off and unplug, then wipe with a dry soft cloth. Avoid liquids.
29. Can external batteries be connected?
Yes — optional external battery banks can extend backup time.
30. Where to purchase the HAMBURG-HT110KS?
Available through the authorized distributor: TNS Engineering Ltd., Bangladesh.
KS-KL.jpg)
