Question 1

What is a 25.6V 200Ah LiFePO4 battery?

Accepted Answer

It's a lithium iron phosphate (LiFePO4) deep-cycle battery with a nominal voltage of 25.6V and a capacity of 200Ah, storing approximately 5.12 kWh of energy. It's used for solar storage, RVs, marine, off-grid, and backup power.

Question 2

What is the energy capacity of a 25.6V 200Ah battery?

Accepted Answer

25.6V × 200Ah = 5,120Wh (5.12 kWh).

Question 3

How many volts is a 25.6V LiFePO4 battery fully charged?

Accepted Answer

A fully charged 25.6V LiFePO4 battery (8 cells in series) reaches about 29.2V (3.65V per cell).

Question 4

At what voltage is a 25.6V 200Ah LiFePO4 battery considered empty?

Accepted Answer

Around 20V–20.8V under load (2.5V–2.6V per cell). Most BMS units cut off at ~20V.

Question 5

How long does a 25.6V 200Ah LiFePO4 battery last?

Accepted Answer

Typically 3,000–5,000+ charge cycles, with some premium brands claiming 6,000–8,000 cycles — translating to roughly 8–15 years of service.

Question 6

What is the lifespan in years?

Accepted Answer

Usually 8–15 years, depending on depth of discharge, temperature, and charging habits.

Question 7

Can I use it as a drop-in replacement for lead-acid batteries?

Accepted Answer

Yes, it's often a direct replacement for 2× 12V lead-acid batteries in series (24V system) or two 12V 100Ah batteries in parallel. Verify your charger's lithium settings first.

Question 8

Does it require a special charger?

Accepted Answer

Yes, use a LiFePO4-compatible charger with a charge voltage of 28.8V–29.2V and a proper lithium charging profile.

Question 9

What is the recommended charge voltage?

Accepted Answer

28.8V–29.2V for full charge (3.6V–3.65V per cell).

Question 10

What is the recommended float voltage?

Accepted Answer

Around 27.2V–27.6V (3.4V–3.45V per cell).

Question 11

Can I charge it with a solar panel?

Accepted Answer

Yes, with an MPPT charge controller set to LiFePO4 parameters. A 800W–1,600W solar array is typical for this battery.

Question 12

How many solar panels do I need to charge it?

Accepted Answer

It depends on sun hours, but roughly 800W–1,200W of solar can fully charge it in a day under good conditions.

Question 13

Can I connect multiple batteries in series?

Accepted Answer

Yes, but only if the BMS supports it. Most 25.6V LiFePO4 batteries allow up to 4 in series (102.4V) — check the manufacturer's spec.

Question 14

Can I connect multiple batteries in parallel?

Accepted Answer

Yes, most allow up to 4–8 in parallel for increased capacity (e.g., 4× 200Ah = 800Ah / 20.48 kWh). Ensure equal voltage before connecting.

Question 15

What is the max continuous discharge current?

Accepted Answer

Commonly 100A–200A, depending on the model and BMS. Check your specific battery's rating.

Question 16

What is the peak discharge current?

Accepted Answer

Usually 200A–400A for 3–10 seconds, depending on the BMS.

Question 17

Does it have a built-in BMS?

Accepted Answer

Yes, most 25.6V 200Ah LiFePO4 batteries include a Battery Management System (BMS) for overcharge, over-discharge, overcurrent, short circuit, and temperature protection.

Question 18

Can it be discharged in cold weather?

Accepted Answer

Discharging works down to about -20°C (-4°F), but capacity is reduced. Charging below 0°C (32°F) damages the battery unless it has low-temp protection.

Question 19

Does it have low-temperature charging protection?

Accepted Answer

Some models do. If you'll charge in cold climates, choose one with low-temp cutoff.

Question 20

Is LiFePO4 safe?

Accepted Answer

Yes, it's one of the safest lithium chemistries — thermally stable, cobalt-free, and resistant to thermal runaway.

Question 21

Can it be mounted in any orientation?

Accepted Answer

Yes, LiFePO4 batteries are safe to mount in any position since they contain no free liquid electrolyte.

Question 22

Is it maintenance-free?

Accepted Answer

Yes, no watering, no equalizing — just keep terminals clean and charge properly.

Question 23

What is the weight compared to lead-acid?

Accepted Answer

Around 40–50 kg (88–110 lbs) — roughly 50–60% lighter than an equivalent lead-acid bank.

Question 24

What applications is it best for?

Accepted Answer

Solar storage, RVs, campervans, marine, golf carts, UPS/backup power, off-grid cabins, and electric trolling motors.

Question 25

Can I use it for a 24V trolling motor?

Accepted Answer

Yes, it's excellent for 24V trolling motors — lightweight, deep-cycle rated, and long-lasting.

Question 26

How do I store it long-term?

Accepted Answer

Store at 50–60% charge (around 26V), in a cool dry place, and recharge every 3–6 months.

Question 27

What is the self-discharge rate?

Accepted Answer

About 2–3% per month, much lower than lead-acid.

Question 28

Does it come with Bluetooth monitoring?

Accepted Answer

Some models do — check the specs. Bluetooth lets you monitor SOC, voltage, current, and cell balance via an app.

Question 29

What warranty is typical?

Accepted Answer

Usually 5–10 years, depending on the brand.

Question 30

How do I know when it's fully charged?

Accepted Answer

The charger will drop to float voltage, current will taper near zero, and the BMS/app will show 100% SOC around 29.2V resting.

Item / Parameter	Specification / Technical Value
Capacity	25.6V200Ah
Model	RPT-Li-256200
Rated Voltage	25.6V
Rated Capacity	200Ah
Rated Energy	5.12kWh
Output Voltage Range	21.6V∿29.6V
Charging Voltage	28.8V∿29.2V
Cut-Off Voltage	21.6V
Max Current Charging	100A
Recommended Charging Current	50A
Temperature	Humidity Relative 5%∿95%, Temperature: -20°C∿ 60°C
Efficiency	>98%
Cycle Life	>6000 times (0.2C, @25°C, 80%DOD)
Design Life	>10Years
Dimension	W×D×H–384mm×650mm×142mm
Weight	48KG

25.6V200Ah LiFePO4

Application

Applications

Questions & Answers for 25.6V200Ah LiFePO4